pressure grouting of voids under machinery bases robt

Pressure Grouting of Voids Under Machinery Bases – Robt. L

Pressure Grouting of Voids Under Machinery Bases. Description After drilling the initial hole or holes into a void, the depth of the void can be determined by measuring the penetration of a stiff wire. Additional holes can also be drilled to confirm the extent of the void.

Technical Newsletters for the Grouting Industry and Others

B. PRESSURE GROUTING OF BASE PLATES AT EDGES. This method is used to fill voids under machinery base plates. 1. If the crack or seam at the edge of the base plate is open more than 0.010 inches (0.25 mm) seal edge with MasterEmaco® ADH 328RS or MasterEmaco ADH 1420 epoxy paste 2. Drill holes in the exposed edges or the structural member or …

Grouting Machinery Base Plates & Base Plate Grouting

The primary purpose of grout under machine baseplates is to reduce vibration and maintain structural integrity with the foundation for as long as the machine is operable. Selecting the right grout material and using the correct placement technique is critical to machine alignment, integrity, and longevity. Types of Machine Base Plate Grouting

Concrete Slab Jacking | Jensen’s Pressure Grouting in

PRESSURE GROUTING OF BASE PLATES AT EDGES This method is used to fill voids under machinery base plates. 1.If the crack or seam at the edge of the base plate is open more than 0.010" (0.25 mm), seal the edge with MasterEmaco ADH 327RS. 2.Drill holes in the exposed edges of the structural member or sole plate. a.

Void filling is performed by filling, by use of a long nozzle, voids left under a slab by means or erosion, foundation repair, settlement, or animals. If little to no pressure is used, its just called pressure grouting.