waste water horizontal double suction split casing grout pump

PACO Horizontal Split Case Pumps: KP | Grundfos

Type KPVS (Vertical Split-coupled Split Case) The PACO KP/KPV split case pump is a single-stage, non-self-priming, between bearing, centrifugal volute pump. The axially split design allows easy removal of the top casing and access to the pump components (bearings, wear rings, impeller, and shaft seal) without disturbing the motor or pipe work.

Pump casing | KSB

This manual covers the installation, operation and maintenance of Patterson Pump horizontal split case pumps. The pump is a centrifugal, single stage, double suction type. When properly installed and when given reasonable care and maintenance, centrifugal pumps should …

Horizontal Split Case Pumps | Find info and get quotes

Fig. 11 Pump casing: Bottom casing half and rotor of a double-suction radial volute casing pump, axially split at shaft centreline The casing joint consists of a flange (see Flange type ) on both casing halves which extends around the entire pump casing including the two stuffing box housings, and which seals the casing in a leak- and pressure …

Peerless AE Horizontal Split-Case Pump – BBC Pump and

HVAC applications – The Patterson EnviroFlo™ line of horizontal split case pumps is designed to minimize energy consumption for a more sustainable HVAC system. The pumps have a flow range to 6,000 gpm and total dynamic head to 160 ft. The standard pump design has a 175 psi case working pressure, with other models allowing for 250 psi.

HS horizontal split case pumps | Grundfos

Using the latest technology, Peerless Pump engineered the AE Series horizontal split-case pump to accommodate a variety of applications. The single stage, double suction, horizontal split case pump comes in forty-two different hydraulic configurations and twenty-five pump sizes.

Axially split pumps | Sulzer

DPAS pumps are double suction, horizontal split case pumps. Since the upper cover of the pump is removable, all internal components can be easily replaced without disassembling the pump from the piping. Stuffing box is cooled with water. Seals are easily dismountable, which makes replacing and fitting up additional seals easy. Since the …

Split-Case Pumps | Intro to Pumps

The Grundfos HS horizontal split case pump is a single-stage, non-self-priming, between bearing, centrifugal volute pump. The axially split design allows easy removal of the top casing and access to the pump components (bearings, wear rings, impeller, and shaft seal) without disturbing the motor or …

The HSA API 610 (ISO 13709) Type BB1 is an axially split, single stage, horizontal, double suction, between bearing pump. The Sulzer HSA product range is ideal for long term continuous running services in refineries and pipelines.

Double-suction impeller: Split-case pumps are the only COMMON pump type with a double suction impeller. A double-suction impeller imposes dramatically fewer loads on the bearings than an impeller that only draws in water from one side of the impeller (single-suction). Split-case pumps are, by-design, a more-balanced machine than most other …